Waterproof IP67 plastic LED driver AC 110v/220v to constant DC output 100W power supply
AC/DC LED Driver LPVE Series

Waterproof IP67 plastic LED driver AC 110v/220v to constant DC output 100W power supply

Teknik Broşür:
Dosyayı İndir

LPV-100E power supply series is a fantastic AC-to-DC converter for delivering constant voltage in wet and dusty environments.

It comes from LPV Series Plastic Waterproof Power Supply Series which operates off-line voltage (90-264VAC) and delivers constant voltages from 5-48VDC depending on your selection.

The 20 to 60 Watt models qualify as Class 2 power units offered in a slim, butter stick design.

If you have any questions, please do not hesitate to contact us atEmail: weho@chnwh.com

ModelLPV-100-5ELPV-100-12ELPV-100-15ELPV-100-24ELPV-100-36ELPV-100-48E
OutputDC Voltage5V12V15V24V36V48V
Rated Current12A8.5A6.7A4.2A2.8A2.1A
Current Range0 ~ 12A0 ~ 8.5A0 ~ 6.7A0 ~ 4.2A0 ~ 2.8A0 ~ 2.1A
Rated Power60W102W100.5W100.8W100.8W100.8W
Ripple & Noise (max.)80mVp-p120mVp-p120mVp-p150mVp-p150mVp-p150mVp-p
Voltage Tolerance±8.0%±5.0%
Line Regulation±1.0%
Load Regulation±6.0%±2.0%
Setup, Rise Time2000ms, 25ms / 230VAC
2000ms, 25ms / 115VAC
Hold Time (Typ.)50ms/230VAC
14ms/115VAC
at full load
InputVoltage Range90 ~ 264VAC  127 ~ 370VDC
Frequency Range47 ~ 63Hz
Efficiency(Typ.)80%85%87%88%88%89%
AC Current2.2A/115VAC 1.2A/230VAC
Inrush Current (max.)COLD START 75A(twidth=700μs measured at 50% Ipeak) at 230VAC
Circuit Breaker2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC
Leakage Current0.25mA / 240VAC
ProtectionOver-load110% ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V41.4 ~ 48.6V55.2 ~ 64.8V
Protection type: Shut down o/p voltage, re-power on to recover
EnvironmentWorking Temp-25°C ~ +70°C (Refer to “Derating Curve”)
Working Humidity20% ~ 90%RH non-condensing
Storage Temp. Humidity-40°C ~ +80°C; 10% ~ 95% RH
Temp Coefficient±0.03%/°C (0 ~ 50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along the X, Y, and Z axes
Safety & EMCSafety StandardsIP67 approved; design refer to EN60950-1
Withstand VoltageI/P-O/P: 1.5KVAC
Isolation ResistanceI/P-O/P: >100M Ohms / 500VDC / 25°C/ 70% RH
EMC EmissionCompliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
EMC ImmunityCompliance to EN55024, light industry level, criteria A
OthersMTBF703Khrs min. MIL-HDBK-217F (25°C)
Dimension190*52*37mm (L*W*H)
Packing0.63Kg; 20pcs/13.6Kg/0.55CUFT

Waterproof IP67 plastic LED driver AC 110v/220v to constant DC output 100W power supply mechanical specification

It allows the end system to easily meet the worldwide energy requirement.

We are 100% responsible for quality.

This product has a universal AC input that is full range.

The product adopts a fully isolated plastic shell.

This product size is small and compact type.