AC/DC Enclosed Type S Series
S-800W serisi normal tek anahtarlamalı güç kaynağı
Teknik Broşür:
Dosyayı İndir
WeHo professional 800W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.
Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.
Low cost also makes it more acceptable for general usage.
If you have any questions, please do not hesitate to contact us atEmail: info@sttekno.com.tr
| Model | S-800-12 | S-800-15 | S-800-24 | S-800-48 | |
| Output | DC Voltage | 12V | 15V | 24V | 48V |
| Voltage Tolerance | ±1% | ±1% | ±1% | ±1% | |
| Rated Current | 66A | 54A | 33A | 16.6A | |
| Current Range | 0-66A | 0-54A | 0-33A | 0-16.6A | |
| Rated Power | 800W | 800W | 800W | 800W | |
| Ripple & Noise | 150mVp-p | 150mVp-p | 240mVp-p | 480mVp-p | |
| DC Adjustment Range | ±5%; Can adjust from 40%~100% output voltage by external control 2-5V | ||||
| Setup, Rise, Hold Time | 800ms, 50ms, 16ms at full load | ||||
| Input | Voltage Range | 90~130VAC / 180~260 VAC47~63 Hz; selected by switch260~370VDC | |||
| AC Current | 13A/115 VAC 8.0A/ 230 VAC | ||||
| Efficiency | 80% | 81% | 85% | 87% | |
| Inrush Current | 60A/230V | ||||
| Leakage Current | 3.5 mA/240VAC | ||||
| Protection | Over Load | 110%~135% | |||
| Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover | |||||
| Over-Temp | TSW1(Power transistor) When temp. >100 °C, shut down o/p voltage, re-power on to recover | ||||
| Environment | Working Temp. Humidity | -10°C ~ +65°C, 20%~90%RH | |||
| Storage Temp. Humidity | -20°C ~ +85°C, 10%~95%RH | ||||
| Vibration | 10~200Hz, 2G 10min./1cycle, the period for 60min, each along X, Y, and Z axes | ||||
| Safety | Withstand Voltage | I/P-O/P, I/P-FG:1500VAC | |||
| Isolation Resistance | I/P-O/P, I/P-FG, >100M Ohms / 500VDC | ||||
| EMC Standard | Design refers to FCC Part 15 Class A | ||||
| Others | Weight | 2.65Kg; | |||
| Packing | 6pcs/16kg/CARTON | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. | |||||
| 3. Tolerance: includes set up tolerance, line regulation, and load regulation. | |||||
| 4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||||
This product has an integrated design that minimizes temperature rise and calorific value.
Weho stocks 200,000 sets of commonly used models, ensuring quick delivery.
The product is highly stable, the workmanship is steady, the output voltage is consistent, and there is no drift.
This product has a minimum order quantity of 100 pieces and can be customized with labels.
This product has Automatic Recovery short-circuit protection.
This product is both low-cost and reliable.
This product is covered by a 24-month warranty.
Product size: 291*132*68mm (L * W * H)
U.S. Switching Power Supply Manufacturers
By reducing the operating current and junction temperature, the stress of the device can be reduced and the reliability of the product can be greatly improved.
Modularization is the general trend in the development of switching power supply.
Distributed power supply systems can be composed of a modular power supply, N+1 redundant power supply system can be designed, and the capacity expansion of parallel mode can be realized.
In view of the disadvantage of high operating noise of switching power supply, if high frequency is pursued alone, its noise will also increase.
The partial resonance conversion circuit technology can theoretically achieve high frequency and reduce noise.
However, there are still technical problems in the practical application of partial resonance conversion technology, so a lot of work still needs to be done in this field to make many technologies practical.
