S-2400W serisi normal tek anahtarlamalı güç kaynağı S Series - AC/DC Enclosed Type

AC/DC Enclosed Type S Series

S-2400W serisi normal tek anahtarlamalı güç kaynağı

Teknik Broşür:

Dosyayı İndir

WeHo professional 2400W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.

115/230V AC range selectable, air cooling by the built-in fan.

Filter capacitance; High withstand voltage; Low dissipation; Large capacity.

Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.

If you have any questions, please do not hesitate to contact us atEmail: info@sttekno.com.tr

Model		S-2400-24	S-2400-27	S-2400-36	S-2400-48
Output	DC Output Voltage	24V	27V	36V	48V
	Output Voltage Tolerance	±1%	±1%	±1%	±1%
	Rated Output Current	100A	89A	67A	50A
	Output Current Range	0-100A	0-89A	0-67A	0-50A
	Output Power	2400W	2400W	2400W	2400W
	Ripple And The Noise	240mVp-p	240mVp	240mVp-p	480mVp-p
	DC Voltage Adjustable Scope	+5%; By external 2~ 5V voltage control, which can adjust the output voltage of the rated voltage the in the range of 40% ~ 100% in value
	Start, Rise, Keep Time	800ms, 50ms, 16ms Loaded with
Input	Input Voltage Range	200V~264VAC 47~63 Hz; 290~370VDC
	Exchange Input Current	11A/ 230 VAC
	Efficiency	85%	85%	86%	87%
		120A/230V
	Leakage Current	3.5 mA/240VAC
Protection Characteristics	Overload Protection	110%~135%
		Protection way: current limiting, delay shut off, restart
	High-Temperature Protection	TSW1 (power tube) temperature > 100 ℃, restart when cut off output
Environment	Working Temperature, Humidity	-10℃ ~ +65℃, 20%~90 %RH
	Keep Temperature, Humidity	-20℃ ~ +85℃, 10%~95 %RH
	Vibrate Resistance	10~200Hz AC, 2G 10min. / 1 cycle time, 60 minutes, the axis
Security	Compression Sex	I/P-O/P, I/P-FG: 1500VAC
	Insulation Resistance	I/P-O/P, I/P-FG, >100M Ohms / 500VDC
	EMC Standard	Accord with
		FCC Part 15 Class A
Other	Weight	5.3Kg;
	Packaging	2pcs/11kg/CARTON
note	1. All the parameters in have not been specified, all are in 230 VAC voltage input, rated load, and 25 ℃ conditions measuring income value.
	2. Ripple and noise voltage are in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement.
	3. Tolerance is voltage setting error, the voltage adjustment rate, and adjusting the sum total of the current rate.
	4. The power to consider as a device installed in final equipment, this equipment must be to make sure it’s EMC index.